# 96 Lexus ES 300 Fuel Pump Problem

**URL:** <https://community.cartalk.com/t/96-lexus-es-300-fuel-pump-problem/46696>\
**Category:** Maintenance/Repairs\
**Tags:** lexus, 300\
**Created:** [March 27, 2010, 1:29pm UTC](https://community.cartalk.com/t/96-lexus-es-300-fuel-pump-problem/46696 "2010-03-27T13:29:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwaits](https://avatars.discourse-cdn.com/v4/letter/j/3da27b/32.png) [@jwaits](https://community.cartalk.com/u/jwaits)\
**Post date:** [March 27, 2010, 1:29pm UTC](https://community.cartalk.com/t/96-lexus-es-300-fuel-pump-problem/46696/1 "2010-03-27T13:29:21Z")

</div>

I own a 1996 Lexus ES300 and just had the fuel pump replaced. The started just fine immediately after replacing the pump… but a couple hours later the car would not start. We placed a fuel pressure gauge on it and not getting a reading. So it seems like the pump is not wanting to kick on… but it will at other times.  
  
  
  
 Any advice or feedback on this issue?

---

<div class="post-metadata">

**Author:** ![researcher](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@researcher](https://community.cartalk.com/u/researcher)\
**Post date:** [March 27, 2010, 6:48pm UTC](https://community.cartalk.com/t/96-lexus-es-300-fuel-pump-problem/46696/2 "2010-03-27T18:48:19Z")

</div>

I would check the fuel pump relay circuit. See if power is getting to the relay; the realy is being switched ‘on’ by the ECM; and sending power to the fuel pump. Also check the fuel pump ground which usually goes to the body somewhere. If you feel like parts replacing, just install a new fuel pump relay and see what happens.

Hope this helps.
