# 95 taurus timing belt cover gasket

**URL:** <https://community.cartalk.com/t/95-taurus-timing-belt-cover-gasket/22728>\
**Category:** Maintenance/Repairs\
**Created:** [November 30, 2008, 12:02pm UTC](https://community.cartalk.com/t/95-taurus-timing-belt-cover-gasket/22728 "2008-11-30T12:02:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bigdog111](https://avatars.discourse-cdn.com/v4/letter/b/41988e/32.png) [@bigdog111](https://community.cartalk.com/u/bigdog111)\
**Post date:** [November 30, 2008, 12:02pm UTC](https://community.cartalk.com/t/95-taurus-timing-belt-cover-gasket/22728/1 "2008-11-30T12:02:42Z")

</div>

how much time to replace gasket and the difficulty from 1-10

---

<div class="post-metadata">

**Author:** ![METOO2](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@METOO2](https://community.cartalk.com/u/METOO2)\
**Post date:** [November 30, 2008, 2:01pm UTC](https://community.cartalk.com/t/95-taurus-timing-belt-cover-gasket/22728/2 "2008-11-30T14:01:32Z")

</div>

you mean chain? and the answer is until youre done. (or a 5)

cheerio

---

<div class="post-metadata">

**Author:** ![MG-McAnick](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mg-mcanick/32/188_2.png) [@MG-McAnick](https://community.cartalk.com/u/MG-McAnick)\
**Post date:** [November 30, 2008, 2:17pm UTC](https://community.cartalk.com/t/95-taurus-timing-belt-cover-gasket/22728/3 "2008-11-30T14:17:48Z")

</div>

Assuming that you have the standard 3.0L OHV engine, what makes you think the timing CHAIN cover’s GASKET is leaking, and not the seal?

Will you replace the CHAIN while you’re in the neighborhood too? Do you have a good set of tools? If you’ve done one before, you’re looking at three or four hours. If not, probably better double that estimate.