# 93 Saab 900 clutch.. no pressure **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** saab, 900\ **Created:** [April 27, 2013, 7:48pm UTC](https://community.cartalk.com/t/93-saab-900-clutch-no-pressure/78956 "2013-04-27T19:48:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Shaneykins](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@Shaneykins](https://community.cartalk.com/u/Shaneykins)\ **Post date:** [April 27, 2013, 7:48pm UTC](https://community.cartalk.com/t/93-saab-900-clutch-no-pressure/78956/1 "2013-04-27T19:48:48Z")
Replaced both MC & slave. Replaced fluid and and hose. Everything worked fine foe a few days and then back to square one. Clutch lost pressure and cannot get car in gear. Any suggestions, please? Thanks ---
**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\ **Post date:** [April 28, 2013, 1:17am UTC](https://community.cartalk.com/t/93-saab-900-clutch-no-pressure/78956/2 "2013-04-28T01:17:13Z")
It’s possible the new clutch master cylinder is defective. It does happen. Tester ---
**Author:** ![KiwiME](https://avatars.discourse-cdn.com/v4/letter/k/0ea827/32.png) [@KiwiME](https://community.cartalk.com/u/KiwiME)\ **Post date:** [April 28, 2013, 8:05am UTC](https://community.cartalk.com/t/93-saab-900-clutch-no-pressure/78956/3 "2013-04-28T08:05:46Z")
No doubt air has gotten back into the system. Does that car have the same annular slave cylinder that they used on the decade-earlier models? If so then it’s drawing air into the slave through its poorly-design seal. Bleed the air out again to find out. ---
**Author:** ![Shaneykins](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@Shaneykins](https://community.cartalk.com/u/Shaneykins)\ **Post date:** [April 28, 2013, 10:05pm UTC](https://community.cartalk.com/t/93-saab-900-clutch-no-pressure/78956/4 "2013-04-28T22:05:52Z")
Thanks folks. The replacement parts were purchased from a Saab dealer (does that mean they are a newer design? That I do not know) However, I’ll start by bleeding out the air and get back with my results. Thanks.