# 89' 300zx

**URL:** <https://community.cartalk.com/t/89-300zx/24169>\
**Category:** Maintenance/Repairs\
**Created:** [December 31, 2008, 10:19pm UTC](https://community.cartalk.com/t/89-300zx/24169 "2008-12-31T22:19:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tdawg31](https://avatars.discourse-cdn.com/v4/letter/t/d78d45/32.png) [@Tdawg31](https://community.cartalk.com/u/Tdawg31)\
**Post date:** [December 31, 2008, 10:19pm UTC](https://community.cartalk.com/t/89-300zx/24169/1 "2008-12-31T22:19:56Z")

</div>

I used the timing mark on the crankshaft damper to find TDC by turning the engine by hand until the mark pointed at zero,I also used a straw in the #1 plug to determine the highest piston,the zero mark and the piston check out fine but I only see one timing mark in the middle,and the rotor points to the #5 plug.