# 68 mustang power steering control valve

**URL:** <https://community.cartalk.com/t/68-mustang-power-steering-control-valve/24753>\
**Category:** Maintenance/Repairs\
**Created:** [January 11, 2009, 9:24pm UTC](https://community.cartalk.com/t/68-mustang-power-steering-control-valve/24753 "2009-01-11T21:24:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![48ford](https://avatars.discourse-cdn.com/v4/letter/4/91b2a8/32.png) [@48ford](https://community.cartalk.com/u/48ford)\
**Post date:** [January 11, 2009, 9:24pm UTC](https://community.cartalk.com/t/68-mustang-power-steering-control-valve/24753/1 "2009-01-11T21:24:28Z")

</div>

i have a 68 mustang and i rebuilt the power steering control valve i installed the control valve,fill with fluid and when i started the steering wheel,started moving crazy from left to right by itself.

---

<div class="post-metadata">

**Author:** ![BustedKnuckles](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bustedknuckles/32/25_2.png) [@BustedKnuckles](https://community.cartalk.com/u/BustedKnuckles)\
**Post date:** [January 11, 2009, 9:49pm UTC](https://community.cartalk.com/t/68-mustang-power-steering-control-valve/24753/2 "2009-01-11T21:49:48Z")

</div>

I believe you did something wrong. You may need to send it off, and have the pros look at it. These are the guys I am going to do my power steering pump and box in my '62 TBird: [www.larescorp.com](http://www.larescorp.com)

---

<div class="post-metadata">

**Author:** ![researcher](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@researcher](https://community.cartalk.com/u/researcher)\
**Post date:** [January 12, 2009, 6:00pm UTC](https://community.cartalk.com/t/68-mustang-power-steering-control-valve/24753/3 "2009-01-12T18:00:53Z")

</div>

There is a balance spring that needs to be adjusted. It is under the cap held on by the two screws. As I remember you put the front up on stands with the wheels free of the ground; remove the cap; loosen the jam nut; place the wheels in the straight ahead position; run the engine; tighten or loosen the spring nut until the power steering cylinder does not move; lock the spring nut with the jam nut; and replace the cover.

Although I am partial to the 67 Mustang, you have a rad ride there. Hope that helps.
