# 2015 Dodge Ram 1500 - Crazy dash display

**URL:** <https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119>\
**Category:** Maintenance/Repairs\
**Tags:** dodge\
**Created:** [December 7, 2020, 8:28pm UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119 "2020-12-07T20:28:40Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![LindaMaldonado](https://avatars.discourse-cdn.com/v4/letter/l/5daacb/32.png) [@LindaMaldonado](https://community.cartalk.com/u/LindaMaldonado)\
**Post date:** [December 7, 2020, 8:28pm UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119/1 "2020-12-07T20:28:40Z")

</div>

Has anyone had this problem?The sensor bell goes off but nothing shows up as wrong. Than all the dash board warning images start flashing, the screen goes black for a second than comes back on and only the check engine light stays on. It doesn’t effect the performance of the truck? We’ve had it at Chrystefer Doged for almost a week now and they don’t seem to know what’s wrong? The codes it pulls is lost communication. Sooo fustrated.

---

<div class="post-metadata">

**Author:** ![davepsinbox\_157004](https://avatars.discourse-cdn.com/v4/letter/d/73ab20/32.png) [@davepsinbox\_157004](https://community.cartalk.com/u/davepsinbox_157004)\
**Post date:** [December 7, 2020, 10:16pm UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119/2 "2020-12-07T22:16:57Z")

</div>

I suspect the TIPM, just on principle. [https://www.knowyourparts.com/technical-resources/electrical/late-model-chrysler-tipm-diagnostics/](https://www.knowyourparts.com/technical-resources/electrical/late-model-chrysler-tipm-diagnostics/)

---

<div class="post-metadata">

**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/48514_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\
**Post date:** [December 7, 2020, 11:03pm UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119/3 "2020-12-07T23:03:08Z")

</div>

> [@davepsinbox\_157004](#):
>
> I suspect the TIPM

+1  
Either that, or the alternator is failing.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [December 7, 2020, 11:20pm UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119/4 "2020-12-07T23:20:16Z")

</div>

> **[U0155 Dodge - Lost Communication With Instrument Panel Cluster Control Module](https://www.autocodes.com/u0155_dodge.html)**
>
> The primary communication network between electronic control modules on this vehicle is the Controller Area Network (CAN) data bus system. The Controller

Tester

---

<div class="post-metadata">

**Author:** ![Cougar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cougar/32/21348_2.png) [@Cougar](https://community.cartalk.com/u/Cougar)\
**Post date:** [December 8, 2020, 1:28am UTC](https://community.cartalk.com/t/2015-dodge-ram-1500-crazy-dash-display/173119/5 "2020-12-08T01:28:18Z")

</div>

I think the answer to this issue is with one of the previous posters ideas. All are good potential areas to cause the trouble. I would check the alternator for excessive AC ripple voltage and verify the power path to the dash panel to make sure that proper power is getting to it. You didn’t state how often the trouble happens. Tapping on suspected areas with a screwdriver may help show up the trouble area.
