# 2014 Subaru XV Crosstrek - Codes

**URL:** <https://community.cartalk.com/t/2014-subaru-xv-crosstrek-codes/160738>\
**Category:** Maintenance/Repairs\
**Tags:** subaru\
**Created:** [March 10, 2020, 11:26pm UTC](https://community.cartalk.com/t/2014-subaru-xv-crosstrek-codes/160738 "2020-03-10T23:26:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ROY28](https://avatars.discourse-cdn.com/v4/letter/r/f4b2a3/32.png) [@ROY28](https://community.cartalk.com/u/ROY28)\
**Post date:** [March 10, 2020, 11:26pm UTC](https://community.cartalk.com/t/2014-subaru-xv-crosstrek-codes/160738/1 "2020-03-10T23:26:30Z")

</div>

CEL Error code P216A

---

<div class="post-metadata">

**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\
**Post date:** [March 11, 2020, 2:51am UTC](https://community.cartalk.com/t/2014-subaru-xv-crosstrek-codes/160738/2 "2020-03-11T02:51:41Z")

</div>

From [repairpal.com](http://repairpal.com)

## Common Problems That Trigger the P216A Code

- Fuel injector failure
- Powertrain Control Module (PCM) failure
- Wiring issue

---

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [March 11, 2020, 8:34pm UTC](https://community.cartalk.com/t/2014-subaru-xv-crosstrek-codes/160738/3 "2020-03-11T20:34:02Z")

</div>

P216A says that the injector is not getting supply voltage. Might check to see if the plugs to all the injectors are connected.

Edit: If they are all plugged in, then unplug them one at a time, with the ignition switch in the run position but engine not started or running, check the pin with the red wire for voltage on each injector plug.