# 2014 Ford Fusion Hybrid Stability Control lights **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** ford, lights\ **Created:** [October 27, 2020, 4:38am UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631 "2020-10-27T04:38:23Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Hpsportsfanatic\_166976](https://avatars.discourse-cdn.com/v4/letter/h/a87d85/32.png) [@Hpsportsfanatic\_166976](https://community.cartalk.com/u/Hpsportsfanatic_166976)\ **Post date:** [October 27, 2020, 4:38am UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/1 "2020-10-27T04:38:23Z")
Hello friends, So my Ford Fusion hybrid has 110k miles on it. My wife was driving it today when the stability control lights both came on. I attempted to turn traction control on as it was showing off. The system won’t allow it to turn on. I hooked up my trusty obd scanner but no codes are being thrown. Nothing, nada. The wife said no noise happened, nothing out of the ordinary. I drove it after the fact and everything seemed fine, minus those 2 lights on the dash. What, if any, ideas do you have? What should I examine and trouble shoot? Thanks as always! ---
**Author:** ![wolyrobb](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wolyrobb/32/45497_2.png) [@wolyrobb](https://community.cartalk.com/u/wolyrobb)\ **Post date:** [October 27, 2020, 5:51am UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/2 "2020-10-27T05:51:56Z")
Most common problem is one of the wheel speed sensors is bad. You need forscan to read the ABS codes. [https://forscan.org/home.html](https://forscan.org/home.html) ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [October 27, 2020, 11:07am UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/3 "2020-10-27T11:07:02Z")
Most code readers only read P codes from the engine control. This car has set a C code, or chassis error code. As @wolyrobb points out, you need a more comprehensive reader. Forscan can do that and more. The PC version is free but requires a laptop and the proper $50 cable. The website shows you which one to buy. I use both the cell phone version and PC version. ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [October 27, 2020, 12:02pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/4 "2020-10-27T12:02:46Z")
Thinking about it… if the ABS light is not on, I’d guess the yaw and acceleration sensor has a problem, not a wheelspeed sensor. A wheelspeed sensor would take out the ABS as well. ---
**Author:** ![sestivers](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@sestivers](https://community.cartalk.com/u/sestivers)\ **Post date:** [October 27, 2020, 12:21pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/5 "2020-10-27T12:21:55Z")
There is also a phone app called OBDFusion that will probably read the code. It will require a separate OBD2 bluetooth dongle and you’d have to buy the app and a Ford-specific bundle of programming. The popular Torque app will not retrieve C-codes. ---
**Author:** ![Hpsportsfanatic\_166976](https://avatars.discourse-cdn.com/v4/letter/h/a87d85/32.png) [@Hpsportsfanatic\_166976](https://community.cartalk.com/u/Hpsportsfanatic_166976)\ **Post date:** [October 27, 2020, 1:27pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/6 "2020-10-27T13:27:58Z")
Any pros/cons on doing the pc version vs the phone one? Noticed 50 dollar difference in units but I use MACs so will have to use a Windows emulator to run the PC version. If the phone version covers everything I might just spend the extra 50 and pay the 100 for the unit. ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [October 27, 2020, 4:20pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/7 "2020-10-27T16:20:22Z")
The PC version is more comprehensive but the phone app will read C codes. ---
**Author:** ![Hpsportsfanatic\_166976](https://avatars.discourse-cdn.com/v4/letter/h/a87d85/32.png) [@Hpsportsfanatic\_166976](https://community.cartalk.com/u/Hpsportsfanatic_166976)\ **Post date:** [October 27, 2020, 8:28pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/8 "2020-10-27T20:28:09Z")
![image](https://global.discourse-cdn.com/cartalk/original/3X/0/b/0b9f35b37b412bee7c38fcfc13cc183422efdf33.png) ![image](https://global.discourse-cdn.com/cartalk/original/3X/7/7/7715edafe8557eeddaec5d7b507511293f7c9997.png) ![image](https://global.discourse-cdn.com/cartalk/original/3X/e/f/ef8c44c220c4864b1dd8f5fd3452a203fa9cddd7.png) I got these under ABS. Will have to do some research. But any early thoughts? ---
**Author:** ![Hpsportsfanatic\_166976](https://avatars.discourse-cdn.com/v4/letter/h/a87d85/32.png) [@Hpsportsfanatic\_166976](https://community.cartalk.com/u/Hpsportsfanatic_166976)\ **Post date:** [October 27, 2020, 9:00pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/9 "2020-10-27T21:00:21Z")
Went with the phone version for now. Posted a few pics of the ABS reading above. Not having much luck on the research front ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [October 28, 2020, 2:15pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/10 "2020-10-28T14:15:16Z")
That B300A code is telling you their is a broken wire from the ignition switch… or the BCM computer has failed which might be more likely ---
**Author:** ![Hpsportsfanatic\_166976](https://avatars.discourse-cdn.com/v4/letter/h/a87d85/32.png) [@Hpsportsfanatic\_166976](https://community.cartalk.com/u/Hpsportsfanatic_166976)\ **Post date:** [October 28, 2020, 9:32pm UTC](https://community.cartalk.com/t/2014-ford-fusion-hybrid-stability-control-lights/171631/11 "2020-10-28T21:32:28Z")
Everything I’m finding on BCM is related to alarm and keyless entry. Am I off track on this? BCM where you recommend starting?