# 2013 Honda CR-V - 2 bad purge valves?

**URL:** <https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823>\
**Category:** Maintenance/Repairs\
**Tags:** engines, honda\
**Created:** [April 10, 2025, 6:39pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823 "2025-04-10T18:39:44Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 10, 2025, 6:39pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/1 "2025-04-10T18:39:44Z")

</div>

i have been getting a check engine light on my Honda CRV 2013. My mechanic checked code and replaced evap system’s purge valve and vent valve yet problem still persists intermittently. Vehicle has 220,000 kms on it and otherwise runs perfectly.mechaic suggest it could be faulty purge valve as replacement was an aftermarket replace. he suggests getting another purge valve from Honda and trying it to see if problem is rectified. .

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [April 11, 2025, 7:30pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/2 "2025-04-11T19:30:17Z")

</div>

Depending on what the DTC is, it might not be a bad purge valve.

Tester

---

<div class="post-metadata">

**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\
**Post date:** [April 11, 2025, 7:46pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/3 "2025-04-11T19:46:34Z")

</div>

A valve does what it is told by computer. Does your valve perform according to scan tool? On and off?

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [April 11, 2025, 7:47pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/4 "2025-04-11T19:47:31Z")

</div>

What is the code? Since you express mileage in kilometers, you aren’t from the USA. I mention that because many of our engine codes are stored in the OBD-II system. If your SUV has OBD-II, let us know what the code is.

---

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 13, 2025, 6:38pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/5 "2025-04-13T18:38:59Z")

</div>

Unfortunately, my mechanic has te code. But 220 K kilometres is approximately 140,000 miles if that helps. I will get the code from mechanic.

It only comes on intermittently so he suspects we got a faulty after-market purge valve and recommends getting one from a Honda dealer and replacing it. Thanks for your help.

---

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 13, 2025, 6:40pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/6 "2025-04-13T18:40:01Z")

</div>

Yes, it seems to.

---

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 13, 2025, 6:41pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/7 "2025-04-13T18:41:57Z")

</div>

Yes mechanic suspects it COULD be. He installed an after-market one and suggests he get one from the Honda dealer which might cost a little more so we might try that.

---

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 13, 2025, 6:43pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/8 "2025-04-13T18:43:00Z")

</div>

The code DID suggest the purge valve.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [April 14, 2025, 4:00am UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/9 "2025-04-14T04:00:45Z")

</div>

I suspect you need a better mechanic

---

<div class="post-metadata">

**Author:** ![TwinTurbo](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@TwinTurbo](https://community.cartalk.com/u/TwinTurbo)\
**Post date:** [April 14, 2025, 12:48pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/10 "2025-04-14T12:48:16Z")

</div>

Most decent bidirectional scan tools can close the vent, open the purge and watch the tank pressure go down. Then close the purge and watch for pressure leaking down. Or pull the intake line and use a handheld vacuum pump to see if the purge holds vacuum while closed. Simple tests…

---

<div class="post-metadata">

**Author:** ![wayjoy](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@wayjoy](https://community.cartalk.com/u/wayjoy)\
**Post date:** [April 14, 2025, 6:40pm UTC](https://community.cartalk.com/t/2013-honda-cr-v-2-bad-purge-valves/199823/11 "2025-04-14T18:40:42Z")

</div>

Thank you.
