# 2013 Ford Fusion Electric Parking Brake Alarms

**URL:** <https://community.cartalk.com/t/2013-ford-fusion-electric-parking-brake-alarms/148383>\
**Category:** Maintenance/Repairs\
**Created:** [September 9, 2019, 1:13pm UTC](https://community.cartalk.com/t/2013-ford-fusion-electric-parking-brake-alarms/148383 "2019-09-09T13:13:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![leeclem44\_156566](https://avatars.discourse-cdn.com/v4/letter/l/ac8455/32.png) [@leeclem44\_156566](https://community.cartalk.com/u/leeclem44_156566)\
**Post date:** [September 9, 2019, 1:13pm UTC](https://community.cartalk.com/t/2013-ford-fusion-electric-parking-brake-alarms/148383/1 "2019-09-09T13:13:37Z")

</div>

I get the Release Park Brake as soon as I turn on the ignition. If I release it, it actually locks up the EPB. I have to shut off the car to reset it. So I’m driving around with the brake light flashing and the beeper beeping for a few weeks now. I never use the EPB. I had a full rear brake job done by AAA a week before this started happening. They rechecked the rear calipers and found them OK.  
The error code B1111-54 says the EPB is missing calibration. AAA tried to reprogram the ABS module but it’s not taking. I took it to the Ford Dealer and they replaced the left actuator which didn’t solve the problem. Then said the left caliper was bad and sent me back to AAA. I found another Ford Document that seems to say if you have this error code to replace the ABS module.  
Any knowledge or thoughts on this issue will be appreciated.