# 2013 Dodge Dart - Over-sensitive fob

**URL:** <https://community.cartalk.com/t/2013-dodge-dart-over-sensitive-fob/121300>\
**Category:** Maintenance/Repairs\
**Tags:** dodge\
**Created:** [July 19, 2018, 4:16pm UTC](https://community.cartalk.com/t/2013-dodge-dart-over-sensitive-fob/121300 "2018-07-19T16:16:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![LaTonya](https://avatars.discourse-cdn.com/v4/letter/l/53a042/32.png) [@LaTonya](https://community.cartalk.com/u/LaTonya)\
**Post date:** [July 19, 2018, 4:16pm UTC](https://community.cartalk.com/t/2013-dodge-dart-over-sensitive-fob/121300/1 "2018-07-19T16:16:39Z")

</div>

My key fob has a remote starter that is really sensitive, If it get bumped the car would start and go right back off, and when I go to start the car it would not start, I would have to wait a few minutes before it would start. Is there something wrong with the key fob?

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [July 19, 2018, 5:23pm UTC](https://community.cartalk.com/t/2013-dodge-dart-over-sensitive-fob/121300/2 "2018-07-19T17:23:12Z")

</div>

You should have two key fobs , do they both act this way ? Have no idea where you are located but if the remote start is not necessary check the fuse diagram to see if you can disable the remote start . Other wise you are going to need a repair shop.