# 2012 Chevrolet Impala - Grinds **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** chevrolet\ **Created:** [July 26, 2019, 11:28am UTC](https://community.cartalk.com/t/2012-chevrolet-impala-grinds/145272 "2019-07-26T11:28:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![RonaldmcDaniel](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RonaldmcDaniel](https://community.cartalk.com/u/RonaldmcDaniel)\ **Post date:** [July 26, 2019, 11:28am UTC](https://community.cartalk.com/t/2012-chevrolet-impala-grinds/145272/1 "2019-07-26T11:28:48Z")
and system comes on with stabilizer and traction control. Grinding noise at low speed when making turns or going over bumps. Both hub bearing assemblies have been replaced which has not fixed the problem. Hopefully you can guide us as to the next step. Thank you ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [July 26, 2019, 12:13pm UTC](https://community.cartalk.com/t/2012-chevrolet-impala-grinds/145272/2 "2019-07-26T12:13:53Z")
Would you start over asking your question? It seems like the top half was cut off. Please add some info about your car as well. ---
**Author:** ![Scrapyard-John](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@Scrapyard-John](https://community.cartalk.com/u/Scrapyard-John)\ **Post date:** [July 27, 2019, 2:15am UTC](https://community.cartalk.com/t/2012-chevrolet-impala-grinds/145272/3 "2019-07-27T02:15:32Z")
Does the grinding happen with and without applying the brakes? ---
**Author:** ![RonaldmcDaniel](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RonaldmcDaniel](https://community.cartalk.com/u/RonaldmcDaniel)\ **Post date:** [August 3, 2019, 10:17am UTC](https://community.cartalk.com/t/2012-chevrolet-impala-grinds/145272/4 "2019-08-03T10:17:21Z")
2012 chev impala makes. Grinding noise when making sliw sharp turnd. Stability warning light comes on. Had wheel hub assemblies replaced on front. Did not help grinding noise . any suggestions?