# 2010 Dodge Ram 1500 - Problems after engine rebuild

**URL:** <https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888>\
**Category:** Maintenance/Repairs\
**Tags:** dodge\
**Created:** [August 28, 2018, 3:15pm UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888 "2018-08-28T15:15:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![LyndonCrane](https://avatars.discourse-cdn.com/v4/letter/l/4af34b/32.png) [@LyndonCrane](https://community.cartalk.com/u/LyndonCrane)\
**Post date:** [August 28, 2018, 3:15pm UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888/1 "2018-08-28T15:15:31Z")

</div>

after replacing cam and lifters have misfire on all 4 rear cylinders.

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [August 28, 2018, 3:34pm UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888/2 "2018-08-28T15:34:14Z")

</div>

What engine? How many miles on it?

Who did the cam and lifter work? Why aren’t you asking them this question?

---

<div class="post-metadata">

**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\
**Post date:** [August 28, 2018, 11:29pm UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888/3 "2018-08-28T23:29:33Z")

</div>

Which is it?

In the title you say engine rebuild.  
In the text you say cam and lifters.

If it’s cam and lifters only then that is NOT a rebuild.

I’m also curious as to why the cam and lifters were replaced. That usually means low oil pressure leading to collapsed lifters and then wiping the cam lobes out.

---

<div class="post-metadata">

**Author:** ![Yosemite](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/yosemite/32/643_2.png) [@Yosemite](https://community.cartalk.com/u/Yosemite)\
**Post date:** [August 29, 2018, 11:46pm UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888/4 "2018-08-29T23:46:42Z")

</div>

Did you make sure that the correct cam went into each bank???

Yosemite

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [August 30, 2018, 2:26am UTC](https://community.cartalk.com/t/2010-dodge-ram-1500-problems-after-engine-rebuild/123888/5 "2018-08-30T02:26:23Z")

</div>

Check the valve timing alignment marks again.