# 2010 Chevrolet Colorado stopped cranking

**URL:** <https://community.cartalk.com/t/2010-chevrolet-colorado-stopped-cranking/162689>\
**Category:** Maintenance/Repairs\
**Tags:** chevrolet, colorado\
**Created:** [April 10, 2020, 1:02pm UTC](https://community.cartalk.com/t/2010-chevrolet-colorado-stopped-cranking/162689 "2020-04-10T13:02:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brodie27](https://avatars.discourse-cdn.com/v4/letter/b/b5a626/32.png) [@Brodie27](https://community.cartalk.com/u/Brodie27)\
**Post date:** [April 10, 2020, 1:02pm UTC](https://community.cartalk.com/t/2010-chevrolet-colorado-stopped-cranking/162689/1 "2020-04-10T13:02:31Z")

</div>

First thing I need to say is I do floor my vehicle a good bit and the issue I’m having is the gas pedal wouldn’t make it go all the sudden and then I turned my truck off and cranked it again then it ran a little them did the same thing eventually it stopped cranking but it will try to crank and I don’t know what’s wrong with it

---

<div class="post-metadata">

**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\
**Post date:** [April 10, 2020, 3:49pm UTC](https://community.cartalk.com/t/2010-chevrolet-colorado-stopped-cranking/162689/2 "2020-04-10T15:49:06Z")

</div>

Can you turn the engine over with a breaker bar on the crankshaft?

---

<div class="post-metadata">

**Author:** ![tcmichnorth](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tcmichnorth/32/25126_2.png) [@tcmichnorth](https://community.cartalk.com/u/tcmichnorth)\
**Post date:** [April 12, 2020, 1:00am UTC](https://community.cartalk.com/t/2010-chevrolet-colorado-stopped-cranking/162689/3 "2020-04-12T01:00:02Z")

</div>

Check the oil.