# 2009 Subaru Outback P0341

**URL:** <https://community.cartalk.com/t/2009-subaru-outback-p0341/155867>\
**Category:** Maintenance/Repairs\
**Tags:** outback, subaru\
**Created:** [January 4, 2020, 8:23pm UTC](https://community.cartalk.com/t/2009-subaru-outback-p0341/155867 "2020-01-04T20:23:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RobertoVasquez](https://avatars.discourse-cdn.com/v4/letter/r/d07c76/32.png) [@RobertoVasquez](https://community.cartalk.com/u/RobertoVasquez)\
**Post date:** [January 4, 2020, 8:23pm UTC](https://community.cartalk.com/t/2009-subaru-outback-p0341/155867/1 "2020-01-04T20:23:52Z")

</div>

Camshaft position sensor code p0341 is showing up. I have replaced the sensor and checked for continuity from the wiring harness, and everything seems ok. The code is still showing up and the care has a heavy oil leak from the left side of engine.

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [January 6, 2020, 2:35pm UTC](https://community.cartalk.com/t/2009-subaru-outback-p0341/155867/2 "2020-01-06T14:35:11Z")

</div>

Worn out timing chain and guides can cause this. An oil leak can’t cause this error but should be fixed.