# 2009 GMC Canyon traction control fault

**URL:** <https://community.cartalk.com/t/2009-gmc-canyon-traction-control-fault/134082>\
**Category:** Maintenance/Repairs\
**Tags:** canyon, gmc\
**Created:** [February 6, 2019, 12:27pm UTC](https://community.cartalk.com/t/2009-gmc-canyon-traction-control-fault/134082 "2019-02-06T12:27:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BrianEmerman](https://avatars.discourse-cdn.com/v4/letter/b/278dde/32.png) [@BrianEmerman](https://community.cartalk.com/u/BrianEmerman)\
**Post date:** [February 6, 2019, 12:27pm UTC](https://community.cartalk.com/t/2009-gmc-canyon-traction-control-fault/134082/1 "2019-02-06T12:27:59Z")

</div>

traction control service message fault , is on then it went off then came back on , has anyone experienced this problem and if so what was the fix for this. Thank You

---

<div class="post-metadata">

**Author:** ![tcmichnorth](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tcmichnorth/32/25126_2.png) [@tcmichnorth](https://community.cartalk.com/u/tcmichnorth)\
**Post date:** [February 6, 2019, 1:57pm UTC](https://community.cartalk.com/t/2009-gmc-canyon-traction-control-fault/134082/2 "2019-02-06T13:57:29Z")

</div>

Most common cause for this is the module had an interrupted signal from a wheel speed sensor. A scanner can identify which sensor. Most common causes are dirty sensor, bad sensor, bad sensor connector, damaged tone wheel that signals the sensor.