# 2009 Chrysler Aspen - Won't start

**URL:** <https://community.cartalk.com/t/2009-chrysler-aspen-wont-start/187879>\
**Category:** Maintenance/Repairs\
**Tags:** chrysler, engines\
**Created:** [December 11, 2022, 5:03am UTC](https://community.cartalk.com/t/2009-chrysler-aspen-wont-start/187879 "2022-12-11T05:03:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Masterofall](https://avatars.discourse-cdn.com/v4/letter/m/ea5d25/32.png) [@Masterofall](https://community.cartalk.com/u/Masterofall)\
**Post date:** [December 11, 2022, 5:03am UTC](https://community.cartalk.com/t/2009-chrysler-aspen-wont-start/187879/1 "2022-12-11T05:03:14Z")

</div>

No bus code on , engine won’t start

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 11, 2022, 7:16pm UTC](https://community.cartalk.com/t/2009-chrysler-aspen-wont-start/187879/2 "2022-12-11T19:16:54Z")

</div>

The car’s computers can’t talk to each other for some reason. Ask shop to

- Check battery charge
- Figure out what’s wrong with the bus system. May be some loose bus connectors. If you want to do something yourself, one of the bus connectors is usually located near the driver’s left knee, used by a shop to plug their scanner into the bus to check for diagnostic codes. See anything unusual in that area?