# 2008 Dodge Caravan Stalls when put into Drive

**URL:** <https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313>\
**Category:** Maintenance/Repairs\
**Tags:** dodge, grandcaravan\
**Created:** [March 13, 2017, 5:56pm UTC](https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313 "2017-03-13T17:56:40Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mitch.christy65](https://avatars.discourse-cdn.com/v4/letter/m/e9a140/32.png) [@mitch.christy65](https://community.cartalk.com/u/mitch.christy65)\
**Post date:** [March 13, 2017, 5:56pm UTC](https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313/1 "2017-03-13T17:56:40Z")

</div>

My Grand Caravan is an SXT model with 4.0L V6 and 6-speed transmission. Vehicle starts fine and all is fine when I put it into reverse, however, when put into Drive, the engine stalls (as if someone turned the ignition switch off).

I was able to get it back into the garage by the engine higher and dropping it into gear…

Am not willing to put it back on the road until the problem can be identified and fixed…

HELP!!

---

<div class="post-metadata">

**Author:** ![shanonia](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@shanonia](https://community.cartalk.com/u/shanonia)\
**Post date:** [March 13, 2017, 8:16pm UTC](https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313/2 "2017-03-13T20:16:06Z")

</div>

I don’t know, but someone here may have some good ideas. Over the years I have found help at [allpar.com](http://allpar.com)’s minivan forum for questions about my two Chrysler minivans.

First thing to check is fluid level in the transmission. Maybe try low or 2 instead of drive.

---

<div class="post-metadata">

**Author:** ![insightful](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/insightful/32/2732_2.png) [@insightful](https://community.cartalk.com/u/insightful)\
**Post date:** [March 13, 2017, 8:30pm UTC](https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313/3 "2017-03-13T20:30:04Z")

</div>

Try letting it completely warm up before putting into drive.

Try wiggling every wiring harness you can see under the hood (watch for spinning things!).

---

<div class="post-metadata">

**Author:** ![Chuck\_Bowman](https://avatars.discourse-cdn.com/v4/letter/c/a88e4f/32.png) [@Chuck\_Bowman](https://community.cartalk.com/u/Chuck_Bowman)\
**Post date:** [January 21, 2019, 10:45pm UTC](https://community.cartalk.com/t/2008-dodge-caravan-stalls-when-put-into-drive/101313/4 "2019-01-21T22:45:24Z")

</div>

Did you find a solution to this problem?
