# 2007 Tahoe Transfer Case not Engaging

**URL:** <https://community.cartalk.com/t/2007-tahoe-transfer-case-not-engaging/79072>\
**Category:** Maintenance/Repairs\
**Tags:** chevrolet, tahoe\
**Created:** [May 2, 2013, 4:24am UTC](https://community.cartalk.com/t/2007-tahoe-transfer-case-not-engaging/79072 "2013-05-02T04:24:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![fowlplay](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fowlplay](https://community.cartalk.com/u/fowlplay)\
**Post date:** [May 2, 2013, 4:24am UTC](https://community.cartalk.com/t/2007-tahoe-transfer-case-not-engaging/79072/1 "2013-05-02T04:24:41Z")

</div>

My transfer case went out on my 07 Tahoe. I replaced it with a professional rebuilt and also put a new encoder motor on it. The truck says it is in “N” and the light flashes for 2wd for a bit and then goes out. I also have a “Service 4wd” on my display. I have double checked everything ensuring I have the correct transfer case and motor. I am at a loss. Am I missing something? Everything worked good before I lost the bearing in my transfer case. Not sure where to go from here?