# 2006 Scion-Service light reset

**URL:** <https://community.cartalk.com/t/2006-scion-service-light-reset/11539>\
**Category:** Maintenance/Repairs\
**Created:** [March 7, 2008, 3:34pm UTC](https://community.cartalk.com/t/2006-scion-service-light-reset/11539 "2008-03-07T15:34:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cbolner](https://avatars.discourse-cdn.com/v4/letter/c/f19dbf/32.png) [@cbolner](https://community.cartalk.com/u/cbolner)\
**Post date:** [March 7, 2008, 3:34pm UTC](https://community.cartalk.com/t/2006-scion-service-light-reset/11539/1 "2008-03-07T15:34:21Z")

</div>

How do you reset the service engine light on the '06 Scion XB after doing an oil change and lube?

---

<div class="post-metadata">

**Author:** ![hoffmalr](https://avatars.discourse-cdn.com/v4/letter/h/bc8723/32.png) [@hoffmalr](https://community.cartalk.com/u/hoffmalr)\
**Post date:** [March 7, 2008, 8:07pm UTC](https://community.cartalk.com/t/2006-scion-service-light-reset/11539/2 "2008-03-07T20:07:08Z")

</div>

I guarantee that it’s in your owner’s manual. So is lots of other really important stuff.

But, I copied this off another forum…it should work: [http://townhall-talk.edmunds.com/direct/view/.efc5081/96](http://townhall-talk.edmunds.com/direct/view/.efc5081/96)

- Step 1 - Turn the key to the ‘on’ position. Using the trip meter button, toggle the LCD display until ‘ODO’ is displayed.
- Step 2 - Turn the key off. Now, push and hold the trip meter button. While holding the trip meter button, turn the key to ‘on’.
- Step 3 - While you continue to hold the trip meter button, you will see on the LCD display 5 small dashes and they will begin to ‘count down’ rather quickly.  
\*Step 4 - Continue holding the trip meter button and once all the dashes have been cleared, the LCD will display six zeros (000000) - release the trip meter button now - and then the LCD will display ‘ODO’ and your current mileage. At this time, your ?Maintenance Required? light has been reset.