# 2006 Ford Explorer Sport Trac has persistent seal leaks

**URL:** <https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622>\
**Category:** Maintenance/Repairs\
**Tags:** explorersporttrac, ford\
**Created:** [December 31, 2019, 8:09am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622 "2019-12-31T08:09:41Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ZAHOOR](https://avatars.discourse-cdn.com/v4/letter/z/9fc348/32.png) [@ZAHOOR](https://community.cartalk.com/u/ZAHOOR)\
**Post date:** [December 31, 2019, 8:09am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/1 "2019-12-31T08:09:41Z")

</div>

Engine Rear Main SEAL Leaks.  
I went to Mechanic and he Changed and again leaked. Then changed again but still not fitting the new SEAL to stop leaks. I bought the original SEALs form Ford Parts.

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [December 31, 2019, 5:22pm UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/2 "2019-12-31T17:22:29Z")

</div>

How many miles on the truck? if the crankshaft it worn , new seals won’t work unless the crank is sleeved. If the crankcase ventilation system is plugged, the oil will blow past good seals.

---

<div class="post-metadata">

**Author:** ![ledhed75](https://avatars.discourse-cdn.com/v4/letter/l/f6c823/32.png) [@ledhed75](https://community.cartalk.com/u/ledhed75)\
**Post date:** [December 31, 2019, 6:58pm UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/3 "2019-12-31T18:58:49Z")

</div>

How much oil is leaking? Can you just keep it topped off?

You can buy a whole lot of oil for what you probably have paid and will pay in parts and labor. Something to consider.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [January 1, 2020, 12:41am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/4 "2020-01-01T00:41:04Z")

</div>

Ask your shop to double-check the pcv system is working properly. A faulty pcv system can over-pressurize the crankcase and cause repeate oil leaks.

Your shop removed the flex-plate, spacer plate, oil slinger, used the correct silicone sealer, lubed the seal before installing it, right?

---

<div class="post-metadata">

**Author:** ![ZAHOOR](https://avatars.discourse-cdn.com/v4/letter/z/9fc348/32.png) [@ZAHOOR](https://community.cartalk.com/u/ZAHOOR)\
**Post date:** [January 2, 2020, 2:20am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/5 "2020-01-02T02:20:36Z")

</div>

Greetings,  
I see the mexhanic dis mot put any silicon or didn’t lubricate the seal, He opened the seal from tje case and installed it. What is the correct procedure please.

Thanks and appreciate.

Z. Rather

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [January 3, 2020, 2:59am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/6 "2020-01-03T02:59:07Z")

</div>

Ford recommends a complicated procedure. Too complicated to post here. Suggest to consult the factory service data.

---

<div class="post-metadata">

**Author:** ![ZAHOOR](https://avatars.discourse-cdn.com/v4/letter/z/9fc348/32.png) [@ZAHOOR](https://community.cartalk.com/u/ZAHOOR)\
**Post date:** [January 3, 2020, 7:05am UTC](https://community.cartalk.com/t/2006-ford-explorer-sport-trac-has-persistent-seal-leaks/155622/7 "2020-01-03T07:05:41Z")

</div>

Thanks and appreciate your time and reply.  
In case there is any procedures online, kindly share the link.

Further do we need to apply any kind of silicon on the outer side of the Seal to srick firm.

Thanks.

Z. RATHER.
