# 2006 Dodge Daytona - Turn signals

**URL:** <https://community.cartalk.com/t/2006-dodge-daytona-turn-signals/145812>\
**Category:** Maintenance/Repairs\
**Tags:** dodge\
**Created:** [August 2, 2019, 6:42pm UTC](https://community.cartalk.com/t/2006-dodge-daytona-turn-signals/145812 "2019-08-02T18:42:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![timothy56](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@timothy56](https://community.cartalk.com/u/timothy56)\
**Post date:** [August 2, 2019, 6:42pm UTC](https://community.cartalk.com/t/2006-dodge-daytona-turn-signals/145812/1 "2019-08-02T18:42:58Z")

</div>

Left Rear turn single not working also the Left turn single on trailer tow plug I noted that the two wire tested both not working I think the Problem is in front of the truuck

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [August 2, 2019, 6:53pm UTC](https://community.cartalk.com/t/2006-dodge-daytona-turn-signals/145812/2 "2019-08-02T18:53:57Z")

</div>

If a short circuit is detected by the front control module a fault will be set and that circuit will be shut off. After the fault is erased with a scan tool the circuit will be restored. You might try disconnecting the battery for a moment to see if that erases the fault.

In most cases the “short” occurred in the trailer, not in the truck.