# 2005 Toyota Tundra V8

**URL:** <https://community.cartalk.com/t/2005-toyota-tundra-v8/122095>\
**Category:** Maintenance/Repairs\
**Tags:** toyota, tundra\
**Created:** [August 1, 2018, 4:49pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095 "2018-08-01T16:49:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pembroke](https://avatars.discourse-cdn.com/v4/letter/p/b3f665/32.png) [@pembroke](https://community.cartalk.com/u/pembroke)\
**Post date:** [August 1, 2018, 4:49pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095/1 "2018-08-01T16:49:25Z")

</div>

2005 V8 Tundra wants to skip or misfire a little under normal acceleration…have replaced plugs with OEM Irridium plugs but still have the skipping.  
Could it be the distributor caps that feed each plug?  
…never been replaced…200, 000 miles

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [August 1, 2018, 4:55pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095/2 "2018-08-01T16:55:19Z")

</div>

Is the Check Engine light on? Blinking?

Tester

---

<div class="post-metadata">

**Author:** ![pembroke](https://avatars.discourse-cdn.com/v4/letter/p/b3f665/32.png) [@pembroke](https://community.cartalk.com/u/pembroke)\
**Post date:** [August 1, 2018, 5:07pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095/3 "2018-08-01T17:07:51Z")

</div>

The check engine light was on before I had the plugs replaced.

It went out but skipping remains

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [August 1, 2018, 5:43pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095/4 "2018-08-01T17:43:35Z")

</div>

I’d replace the spark plug wires, distributor cap, and rotor, if it has them.

Edit - they’re not listed, so you just mean the spark plug caps, not ‘distributor caps’, right?

Did you get the code read when the check engine light was on?

---

<div class="post-metadata">

**Author:** ![always\_fixing](https://avatars.discourse-cdn.com/v4/letter/a/71e660/32.png) [@always\_fixing](https://community.cartalk.com/u/always_fixing)\
**Post date:** [August 1, 2018, 7:38pm UTC](https://community.cartalk.com/t/2005-toyota-tundra-v8/122095/5 "2018-08-01T19:38:57Z")

</div>

Trying looking for and cleaning any carbon trails on the inside of the spark plug coil over covers. Ive had an issue with moisture in the air and a carbon trail on the inside of the covers causing a resistive short which would cause random misfires. Cleaning them out fixed it.
