# 2004 Honda CR-V grinding sound

**URL:** <https://community.cartalk.com/t/2004-honda-cr-v-grinding-sound/139374>\
**Category:** Maintenance/Repairs\
**Tags:** cr-v, honda\
**Created:** [April 27, 2019, 6:21pm UTC](https://community.cartalk.com/t/2004-honda-cr-v-grinding-sound/139374 "2019-04-27T18:21:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kelsea](https://avatars.discourse-cdn.com/v4/letter/k/74df32/32.png) [@Kelsea](https://community.cartalk.com/u/Kelsea)\
**Post date:** [April 27, 2019, 6:21pm UTC](https://community.cartalk.com/t/2004-honda-cr-v-grinding-sound/139374/1 "2019-04-27T18:21:27Z")

</div>

There is a loud grinding sound coming from the right front wheel well, mostly at lower speeds, louder when braking, but it also happens when I’m not breaking. I replaced the discs, pads, and calipers, and that didn’t fix the problem. It is front wheel drive

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [April 27, 2019, 7:38pm UTC](https://community.cartalk.com/t/2004-honda-cr-v-grinding-sound/139374/2 "2019-04-27T19:38:46Z")

</div>

Maybe a wheel bearing, maybe a CV joint is bad. Could even be a brake dust shield.

Jack the car up at the front, remove wheels, place in neutral and turn the wheel by hand. You should be able to feel the roughness or see what is rubbing.

---

<div class="post-metadata">

**Author:** ![Marktoday](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@Marktoday](https://community.cartalk.com/u/Marktoday)\
**Post date:** [April 29, 2019, 11:24am UTC](https://community.cartalk.com/t/2004-honda-cr-v-grinding-sound/139374/3 "2019-04-29T11:24:20Z")

</div>

Was the noise happening before the brake job?  
Agree with Mustangman, bearings or CV joint. Are you getting any shaking (vibration) when driving?  
Set of bearings is about $30.