# 2004 chevy malibu classic

**URL:** <https://community.cartalk.com/t/2004-chevy-malibu-classic/80082>\
**Category:** Maintenance/Repairs\
**Created:** [June 30, 2013, 6:10am UTC](https://community.cartalk.com/t/2004-chevy-malibu-classic/80082 "2013-06-30T06:10:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sideyardmech](https://avatars.discourse-cdn.com/v4/letter/s/ecccb3/32.png) [@sideyardmech](https://community.cartalk.com/u/sideyardmech)\
**Post date:** [June 30, 2013, 6:10am UTC](https://community.cartalk.com/t/2004-chevy-malibu-classic/80082/1 "2013-06-30T06:10:44Z")

</div>

my blinkers make wierd sounds and does not work half the time unless i hit the hazard lights. problem two theft system light comes on and stays on. problem three shut off car to re-start i think i can i think i can then start no problem after words. fourth problem the seat belt buzzer wont stop have to play with key in ignition. btw its a 2004 chevy malibu classic hubby bought not me lol

---

<div class="post-metadata">

**Author:** ![knfenimore](https://avatars.discourse-cdn.com/v4/letter/k/9fc348/32.png) [@knfenimore](https://community.cartalk.com/u/knfenimore)\
**Post date:** [June 30, 2013, 9:33pm UTC](https://community.cartalk.com/t/2004-chevy-malibu-classic/80082/2 "2013-06-30T21:33:46Z")

</div>

It could be power to the Body Control Module or flakey BCM. There is an IBCM 1 fuse under the hood that you could reseat and the BCM connector reseat. A flackey ignition switch could very well be the problem. There are connection issues where the TSB says to add dielectric grease to the connectors and reseat them.