# 2002 chevy Malibu overheated now won't start

**URL:** <https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890>\
**Category:** Maintenance/Repairs\
**Created:** [December 7, 2015, 5:48am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890 "2015-12-07T05:48:32Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![unique1212](https://avatars.discourse-cdn.com/v4/letter/u/e19b73/32.png) [@unique1212](https://community.cartalk.com/u/unique1212)\
**Post date:** [December 7, 2015, 5:48am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/1 "2015-12-07T05:48:32Z")

</div>

So my Malibu overheated for the first time, and note it just won’t start up… Help me please.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 7, 2015, 5:52am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/2 "2015-12-07T05:52:33Z")

</div>

First tell us, does it crank ok, just won’t catch and run? Or won’t it even crank?

---

<div class="post-metadata">

**Author:** ![unique1212](https://avatars.discourse-cdn.com/v4/letter/u/e19b73/32.png) [@unique1212](https://community.cartalk.com/u/unique1212)\
**Post date:** [December 7, 2015, 6:10am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/3 "2015-12-07T06:10:03Z")

</div>

Yes it cranks but it just won’t start

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 7, 2015, 6:16am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/4 "2015-12-07T06:16:51Z")

</div>

You need to test if the engine was damaged internally then by the overheating. A compression test would usually be the next step, assuming there aren’t any unusual noises occurring during cranking. You are welcome to post the compression results here, maybe somebody can suggest what the most likely problem.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [December 7, 2015, 6:24am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/5 "2015-12-07T06:24:16Z")

</div>

@unique1212

If you do a compression test . . . do wet AND dry compression test, and post the numbers

By the way, is the engine spinning over WAY faster than before, but not starting?

If so, that isn’t good

---

<div class="post-metadata">

**Author:** ![unique1212](https://avatars.discourse-cdn.com/v4/letter/u/e19b73/32.png) [@unique1212](https://community.cartalk.com/u/unique1212)\
**Post date:** [December 7, 2015, 6:29am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/6 "2015-12-07T06:29:52Z")

</div>

No when I try to start it, it cranks slow almost like the battery is dying or something

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 7, 2015, 6:36am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/7 "2015-12-07T06:36:10Z")

</div>

You may have drained the battery trying to start it. Ask your shop to hook up a battery charger and recharge the battery first, before further cranking attempts.

What was the sequence of events exactly? You were driving down the road and it overheated and stalled? Or it overheated but still ran ok, so you drove it home, parked it overnight. Then it wouldn’t start the next day?

---

<div class="post-metadata">

**Author:** ![unique1212](https://avatars.discourse-cdn.com/v4/letter/u/e19b73/32.png) [@unique1212](https://community.cartalk.com/u/unique1212)\
**Post date:** [December 7, 2015, 7:03am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/8 "2015-12-07T07:03:48Z")

</div>

No today it ran hot out of no where, it never ran hot before. So I turned it off to cool it down, put water than it didn’t start back up, so I got it towed home and still nothing

---

<div class="post-metadata">

**Author:** ![MY\_2\_CENTS](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@MY\_2\_CENTS](https://community.cartalk.com/u/MY_2_CENTS)\
**Post date:** [December 7, 2015, 7:48am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/9 "2015-12-07T07:48:54Z")

</div>

Does this car have the 3.1 engine? These are famous for having intake manifold gasket problems. Have you been having to add coolant ? Does the oil look like chocolate milk shake?

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [December 7, 2015, 8:45am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/10 "2015-12-07T08:45:41Z")

</div>

@unique1212

I agree . . . the GM 3.1 and 3.4 v6 engines are well known for this

Since you were low on coolant, it went somewhere

No obvious external coolant leaks?

Check your engine oil level . . . if it’s high and looks like starbucks frappuccino, you know where the coolant went

The good news is that this is not an uncommon repair. Just about any competent independent shop should be able to handle this. There are exceptions, that’s why I used the words “just about”

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 8, 2015, 6:47am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/11 "2015-12-08T06:47:44Z")

</div>

I’ve heard of this GM engine problem with intake manifold and coolant ports. Just curious for anybody out there that knows, why does the intake manifold have coolant going through it? I wouldn’t guess the intake manifold would get overly hot. I don’t think there’s any coolant going to the intake manifold on my 4afe Corolla is there? With GM engines, is there some gadget on the intake manifold that operates based on the coolant temperature, and so they just decided to run the coolant over to that gadget inside the intake manifold? On my Corolla, that’s the case with the throttle body, the gadget that acts as the choke needs to know the coolant temperature so they just ran the coolant to the throttle body. Or does the intake manifold actually need to be cooled on this GM engine?

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 8, 2015, 6:49am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/12 "2015-12-08T06:49:35Z")

</div>

Question for OP: When it overheated, were you in stop and go city type driving, or driving on the freeway. I had my Corolla overheat one time in stop and go driving b/c the radiator coolant fan stopped working and I didn’t realize it.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [December 8, 2015, 11:11am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/13 "2015-12-08T11:11:39Z")

</div>

@GeorgeSanJose

You’re overthinking it . . .

it’s not just GM V engines that have coolant running through the manifold

Many manufacturers do/did this

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 9, 2015, 6:59am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/14 "2015-12-09T06:59:39Z")

</div>

Ok, thanks for the explanation @db4690

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [December 9, 2015, 7:36am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/15 "2015-12-09T07:36:11Z")

</div>

Between the cylinder heads is a practical location for the water outlet, that is one reason the coolant passage is integrated into the intake manifold.

The intake manifold may have been leaking, ideally it is best to address leaks like that before destroying the engine.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 9, 2015, 7:48am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/16 "2015-12-09T07:48:32Z")

</div>

Ok, I can see that for V type engines. Is the same true for most inline -4’s?

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [December 9, 2015, 8:13am UTC](https://community.cartalk.com/t/2002-chevy-malibu-overheated-now-wont-start/91890/17 "2015-12-09T08:13:28Z")

</div>

Not anymore. In the 1970’s and '80’s the heater hose passage was sometimes routed through the manifold of inline engines to warm the manifold and reduce emissions. With multi-port injection it is unnecessary.
