# 2001 Nissan Sentra front lower control arm busing

**URL:** <https://community.cartalk.com/t/2001-nissan-sentra-front-lower-control-arm-busing/55469>\
**Category:** Maintenance/Repairs\
**Tags:** nissan, sentra\
**Created:** [September 23, 2010, 10:40am UTC](https://community.cartalk.com/t/2001-nissan-sentra-front-lower-control-arm-busing/55469 "2010-09-23T10:40:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndyB1](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@AndyB1](https://community.cartalk.com/u/AndyB1)\
**Post date:** [September 23, 2010, 10:40am UTC](https://community.cartalk.com/t/2001-nissan-sentra-front-lower-control-arm-busing/55469/1 "2010-09-23T10:40:51Z")

</div>

I have a 2001 Nissan Sentra which needs the front lower rear control arm busing replaced. I found the bushing through 1 parts store. It appears the bushing will have to be pressed in??? Has anyone done this jobe before ? I am looking for suggestions from someone who has done this job before…

---

<div class="post-metadata">

**Author:** ![ignoramus9](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@ignoramus9](https://community.cartalk.com/u/ignoramus9)\
**Post date:** [September 23, 2010, 9:38pm UTC](https://community.cartalk.com/t/2001-nissan-sentra-front-lower-control-arm-busing/55469/2 "2010-09-23T21:38:01Z")

</div>

First you have to press the old one out. You can use a C-clamp to do this, but it is akward. find a shop with a 5-ton press and pay them 5 bucks to do it for you.

---

<div class="post-metadata">

**Author:** ![AndyB1](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@AndyB1](https://community.cartalk.com/u/AndyB1)\
**Post date:** [September 23, 2010, 9:52pm UTC](https://community.cartalk.com/t/2001-nissan-sentra-front-lower-control-arm-busing/55469/3 "2010-09-23T21:52:53Z")

</div>

Thanks very much