# 2001 Deville Rear Wheel Bearing Replacement

**URL:** <https://community.cartalk.com/t/2001-deville-rear-wheel-bearing-replacement/22215>\
**Category:** Maintenance/Repairs\
**Created:** [November 17, 2008, 11:48pm UTC](https://community.cartalk.com/t/2001-deville-rear-wheel-bearing-replacement/22215 "2008-11-17T23:48:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dwightvirginia](https://avatars.discourse-cdn.com/v4/letter/d/e47c2d/32.png) [@dwightvirginia](https://community.cartalk.com/u/dwightvirginia)\
**Post date:** [November 17, 2008, 11:48pm UTC](https://community.cartalk.com/t/2001-deville-rear-wheel-bearing-replacement/22215/1 "2008-11-17T23:48:20Z")

</div>

After removing the bolts, what is the recomended procedure for separating the steel hub from the aluminium swing arm?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 18, 2008, 12:10am UTC](https://community.cartalk.com/t/2001-deville-rear-wheel-bearing-replacement/22215/2 "2008-11-18T00:10:31Z")

</div>

The combination of these two tools.  
[http://www.northerntool.com/webapp/wcs/stores/servlet/NTESearch?storeId=6970&in\_dym=1&Nty=1&D=than&Ntx=mode+matchallpartial&N=0&Ntk=All&Ntt=hub%20puller&cmnosearch=PPC&cm\_ven=PPC&cm\_cat=I-search%20(Google%20Adwords)&cm\_pla=unproven&cm\_ite=hub%20puller](http://www.northerntool.com/webapp/wcs/stores/servlet/NTESearch?storeId=6970&in_dym=1&Nty=1&D=than&Ntx=mode+matchallpartial&N=0&Ntk=All&Ntt=hub%20puller&cmnosearch=PPC&cm_ven=PPC&cm_cat=I-search%20(Google%20Adwords)&cm_pla=unproven&cm_ite=hub%20puller)

Tester
