# 2000 Jeep Grand Cherokee **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** cherokee, jeep\ **Created:** [July 27, 2009, 2:28pm UTC](https://community.cartalk.com/t/2000-jeep-grand-cherokee/34090 "2009-07-27T14:28:39Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![heathwood](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@heathwood](https://community.cartalk.com/u/heathwood)\ **Post date:** [July 27, 2009, 2:28pm UTC](https://community.cartalk.com/t/2000-jeep-grand-cherokee/34090/1 "2009-07-27T14:28:39Z")
I have a 2000 Jeep with 150k miles on it. It has been making a clicking sound when I make turns at slow speed. More noticeable when I make left turns. Now there is a metallic noise when I hit any bumps, even if going straight. ---
**Author:** ![missileman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/missileman/32/1366_2.png) [@missileman](https://community.cartalk.com/u/missileman)\ **Post date:** [July 27, 2009, 6:34pm UTC](https://community.cartalk.com/t/2000-jeep-grand-cherokee/34090/2 "2009-07-27T18:34:22Z")
Have the disc brakes on the front checked. That’s where most noise originates. Check that your lugnuts are tight also. A loose wheel sometimes makes a noise until the BIG noise and the lugs break off. Have a qualified mechanic check these items. ---
**Author:** ![heathwood](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@heathwood](https://community.cartalk.com/u/heathwood)\ **Post date:** [July 27, 2009, 10:52pm UTC](https://community.cartalk.com/t/2000-jeep-grand-cherokee/34090/3 "2009-07-27T22:52:08Z")
Thanks ---
**Author:** ![vicpick58](https://avatars.discourse-cdn.com/v4/letter/v/e99b99/32.png) [@vicpick58](https://community.cartalk.com/u/vicpick58)\ **Post date:** [July 28, 2009, 1:23am UTC](https://community.cartalk.com/t/2000-jeep-grand-cherokee/34090/4 "2009-07-28T01:23:23Z")
If your Jeep is a four wheel drive, check the C/V joints on your front axle halfshafts. Most likly you have a torn boot and may have ruind a C/V joint. A 2000 Grand Cherokee will also have a C/V joint on the front driveshaft, you might check that too. There is a TSB regarding replaceing the front driveshaft with a U-joint style one. I had that done to my 2000 at around 100k miles. A worn out C/V joint can make a clicking noise.