# 2000 Ford Explorer - Heater - Where do I start?

**URL:** <https://community.cartalk.com/t/2000-ford-explorer-heater-where-do-i-start/124972>\
**Category:** Maintenance/Repairs\
**Tags:** ford\
**Created:** [September 14, 2018, 1:42pm UTC](https://community.cartalk.com/t/2000-ford-explorer-heater-where-do-i-start/124972 "2018-09-14T13:42:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![harryCey](https://avatars.discourse-cdn.com/v4/letter/h/c6cbf5/32.png) [@harryCey](https://community.cartalk.com/u/harryCey)\
**Post date:** [September 14, 2018, 1:42pm UTC](https://community.cartalk.com/t/2000-ford-explorer-heater-where-do-i-start/124972/1 "2018-09-14T13:42:07Z")

</div>

heater control quit. no fan in all selections

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [September 14, 2018, 1:55pm UTC](https://community.cartalk.com/t/2000-ford-explorer-heater-where-do-i-start/124972/2 "2018-09-14T13:55:15Z")

</div>

So is your question; What might be wrong?

Either the fan motor’s fuse, the motor itself. It could be the resistor pack for the motor but they usually fail one of the lower speeds but high still works. Could even be the blower motor control switch.