# 2000 Camry door panel removal

**URL:** <https://community.cartalk.com/t/2000-camry-door-panel-removal/30321>\
**Category:** Maintenance/Repairs\
**Tags:** doors, windows\
**Created:** [May 11, 2009, 5:06pm UTC](https://community.cartalk.com/t/2000-camry-door-panel-removal/30321 "2009-05-11T17:06:10Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dopey17](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@dopey17](https://community.cartalk.com/u/dopey17)\
**Post date:** [May 11, 2009, 5:06pm UTC](https://community.cartalk.com/t/2000-camry-door-panel-removal/30321/1 "2009-05-11T17:06:10Z")

</div>

I need instructions for removing the right rear door panel for repairing window regulator

---

<div class="post-metadata">

**Author:** ![mcparadise](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mcparadise/32/32_2.png) [@mcparadise](https://community.cartalk.com/u/mcparadise)\
**Post date:** [May 11, 2009, 6:38pm UTC](https://community.cartalk.com/t/2000-camry-door-panel-removal/30321/2 "2009-05-11T18:38:21Z")

</div>

I recommend Haynes service manuals for things like this. The manual will show you where all the fasteners for the door panel are located. Sometimes they’re difficult to find.

---

<div class="post-metadata">

**Author:** ![glengrab](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@glengrab](https://community.cartalk.com/u/glengrab)\
**Post date:** [May 11, 2009, 7:48pm UTC](https://community.cartalk.com/t/2000-camry-door-panel-removal/30321/3 "2009-05-11T19:48:36Z")

</div>

Try putting “2000 Camry door panel removal” in Google. I did and got several choices of pages with lots of pictures and diagrams. I used a similar approach to recently replace some door hardware on my 96 Camry, and it was MUCH easier with the pictures of each step than doing it with a manual.

---

<div class="post-metadata">

**Author:** ![meaneyedcatz](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/meaneyedcatz/32/692_2.png) [@meaneyedcatz](https://community.cartalk.com/u/meaneyedcatz)\
**Post date:** [May 12, 2009, 1:55am UTC](https://community.cartalk.com/t/2000-camry-door-panel-removal/30321/4 "2009-05-12T01:55:15Z")

</div>

It is fairly easy. Remove any bolts, screws, etc. Purchase a trim panel removal tool, it’s cheap enough. It looks like a 2 tined fork and the tines are very wide. Start at the bottom and use the tool carefully around the plastic retainers and pry them out.