# 1998 Dodge Ram with a vibration

**URL:** <https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501>\
**Category:** Maintenance/Repairs\
**Tags:** vibration, ram, dodge, 1500\
**Created:** [May 7, 2010, 3:40am UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501 "2010-05-07T03:40:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![aitchball](https://avatars.discourse-cdn.com/v4/letter/a/c89c15/32.png) [@aitchball](https://community.cartalk.com/u/aitchball)\
**Post date:** [May 7, 2010, 3:40am UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/1 "2010-05-07T03:40:27Z")

</div>

I have a 1998 Dodge Ram 1500, 4WD, extended cab, short bed. It vibrates at all speeds. My local mechanic, who is awesome, has had a nervous breakdown, because he has, “…never met a vehicle he couldn’t fix.”  
  
  
  
 So far, we have:  
  
 - Replaced out of round tires  
  
 - Balanced and rotated  
  
 - Replaced a bent wheel  
  
 - Replaced a bent rear axle  
  
 - Replaced a manky rear pumpkin  
  
 - Replaced the steering damper  
  
 - Replaced the control bar  
  
 - Spun the drive shaft at a tuner shop up to 4,000 RPMs ? It?s balanced  
  
 - Replaced a rotten water pump  
  
  
  
 With all of the maintenance, it drives like it did when it was new, except, of course, for the vibration.  
  
  
  
 Thanks!  
  
 Hansen

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [May 7, 2010, 5:24am UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/2 "2010-05-07T05:24:07Z")

</div>

What engine do you have,and what is a “manky” rear pumpkin?

Also- does it have to be moving to vibrate and if so what speed or rpm?

---

<div class="post-metadata">

**Author:** ![aitchball](https://avatars.discourse-cdn.com/v4/letter/a/c89c15/32.png) [@aitchball](https://community.cartalk.com/u/aitchball)\
**Post date:** [May 7, 2010, 1:30pm UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/3 "2010-05-07T13:30:17Z")

</div>

manky pmpkin - Rear differential had some damaged teeth and skipped occasionally. It was replaced.

It vibrates at all speeds, and not when stationary. The vibration becomes more pronounced at higher speeds.

---

<div class="post-metadata">

**Author:** ![CapriRacer](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/capriracer/32/22_2.png) [@CapriRacer](https://community.cartalk.com/u/CapriRacer)\
**Post date:** [May 8, 2010, 12:17pm UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/4 "2010-05-08T12:17:49Z")

</div>

Check the pinion angle and the U joints.

---

<div class="post-metadata">

**Author:** ![aitchball](https://avatars.discourse-cdn.com/v4/letter/a/c89c15/32.png) [@aitchball](https://community.cartalk.com/u/aitchball)\
**Post date:** [May 10, 2010, 4:58pm UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/5 "2010-05-10T16:58:48Z")

</div>

I knew there was some stuff I left off of the list:

- Replaced a bad U-Joint (and checked all of them)
- Replaced all worn or suspect bushings
- Pinion angle was checked before and after they pulled the drive shaft to check it at the tuner shop.

Thanks!

---

<div class="post-metadata">

**Author:** ![researcher](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@researcher](https://community.cartalk.com/u/researcher)\
**Post date:** [May 10, 2010, 6:25pm UTC](https://community.cartalk.com/t/1998-dodge-ram-with-a-vibration/48501/6 "2010-05-10T18:25:16Z")

</div>

Is this Ram lifted? If so by how much?
