# 1998 Chrysler Sebring

**URL:** <https://community.cartalk.com/t/1998-chrysler-sebring/62024>\
**Category:** Maintenance/Repairs\
**Tags:** chrysler, sebring\
**Created:** [March 1, 2011, 12:36am UTC](https://community.cartalk.com/t/1998-chrysler-sebring/62024 "2011-03-01T00:36:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ccking56](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@ccking56](https://community.cartalk.com/u/ccking56)\
**Post date:** [March 1, 2011, 12:36am UTC](https://community.cartalk.com/t/1998-chrysler-sebring/62024/1 "2011-03-01T00:36:49Z")

</div>

ASD Fuse keeps blowing. I unplug PCM and fuse no longer blows. I plugged in pin 41-80 and the the fuse is still ok. Car just quit running and starter will not turn. Does pin 1-40 control starter and fuel??  
  
 Could I have a bad PCM??

---

<div class="post-metadata">

**Author:** ![BustedKnuckles](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bustedknuckles/32/25_2.png) [@BustedKnuckles](https://community.cartalk.com/u/BustedKnuckles)\
**Post date:** [March 1, 2011, 12:39am UTC](https://community.cartalk.com/t/1998-chrysler-sebring/62024/2 "2011-03-01T00:39:08Z")

</div>

Plug in the connector for pins 1-40. If the fuse blows, the PCM is shot.

---

<div class="post-metadata">

**Author:** ![ccking56](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@ccking56](https://community.cartalk.com/u/ccking56)\
**Post date:** [March 1, 2011, 3:01am UTC](https://community.cartalk.com/t/1998-chrysler-sebring/62024/3 "2011-03-01T03:01:13Z")

</div>

Thank you