# 1998 chevy malibu

**URL:** <https://community.cartalk.com/t/1998-chevy-malibu/6808>\
**Category:** Maintenance/Repairs\
**Created:** [November 4, 2007, 12:22am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808 "2007-11-04T00:22:02Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 12:22am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/1 "2007-11-04T00:22:02Z")

</div>

I have a 1998 chevy malibu 3.1, it died on me yesterday. it will not start, i tried charging the battery but that didn’t help, i even bought a new one with the same results. when i try to turn it over the head lights and radio clock go dim. if anyone has any suggestion about this problem ,please help.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 12:32am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/2 "2007-11-04T00:32:30Z")

</div>

The problem might be with the positive battery cable.

If you look at the cables where they connect to the battery, they have rubber covers. It’s under the red rubber cover on positive cable where corrosion can form causing a voltage drop. Which will cause all the problems you’re having.

Disconnect the negative cable first and then the positive. Peel back the red rubber cover for the positive cable, and if you find a white/greenish powder-like substance, that’s the problem. If the cable end is heavily corroded, replace the cable.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 12:37am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/3 "2007-11-04T00:37:15Z")

</div>

I did replace the positive cable but still won’t start.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 12:46am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/4 "2007-11-04T00:46:33Z")

</div>

Another thing that can cause this is a defective starter.

If the starter is worn to the point where is won’t spin, the current draw from the battery to the starter will also cause the lights to dim. And of course the engine won’t start because the starter is bad.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 12:48am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/5 "2007-11-04T00:48:40Z")

</div>

you know when i try to turn it over go to the off position i hear clicking noise but i have no idea where it is coming from.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 12:51am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/6 "2007-11-04T00:51:03Z")

</div>

That’s the starter relay disengaging. Which is mounted on the starter.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 12:52am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/7 "2007-11-04T00:52:29Z")

</div>

so you think i should go ahead and replace it?

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 12:54am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/8 "2007-11-04T00:54:22Z")

</div>

is the starter relay the same as the slenoid?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 1:01am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/9 "2007-11-04T01:01:24Z")

</div>

If it’s easy to get to the starter, bang on it with a baseball bat or something similar and then try starting the car. If it starts, you found the problem. But if still doesn’t start, the starter could still be the problem. One way to test for a bad starter is to measure the current draw of the starter. But this requires an ammeter that can measure that amount of current. Not cheap! So the next best thing to do is remove the starter and bring it to a parts store that will test it for you before purchasing a replacement.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 1:03am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/10 "2007-11-04T01:03:08Z")

</div>

thank you very much i really appreciate your help.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 1:03am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/11 "2007-11-04T01:03:25Z")

</div>

Yes.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 1:14am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/12 "2007-11-04T01:14:18Z")

</div>

one more thing, you think i should check the ignition switch?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 1:20am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/13 "2007-11-04T01:20:27Z")

</div>

No. What you’re describing is a large current draw off the battery. The current that goes through the ignition switch isn’t enough to cause the lights to dim. But when you turn the ignition switch to the start position, you energize the starter solenoid to close the contacts that connect the battery to the starter. And that’s when the lights dim.

Tester

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 1:22am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/14 "2007-11-04T01:22:16Z")

</div>

thank you very much.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 4, 2007, 1:23am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/15 "2007-11-04T01:23:28Z")

</div>

You’re welcome!

Tester

---

<div class="post-metadata">

**Author:** ![Wha-Who](https://avatars.discourse-cdn.com/v4/letter/w/9f8e36/32.png) [@Wha-Who](https://community.cartalk.com/u/Wha-Who)\
**Post date:** [November 4, 2007, 2:25am UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/16 "2007-11-04T02:25:15Z")

</div>

Clean both ends of both battery cables and make sure that you also clean any ground connections that you might have at your bell housing.

---

<div class="post-metadata">

**Author:** ![sadcar](https://avatars.discourse-cdn.com/v4/letter/s/8c91f0/32.png) [@sadcar](https://community.cartalk.com/u/sadcar)\
**Post date:** [November 4, 2007, 6:25pm UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/17 "2007-11-04T18:25:28Z")

</div>

I did replace the starter and it worked, i thank you very much.

---

<div class="post-metadata">

**Author:** ![JTAMETHYST](https://avatars.discourse-cdn.com/v4/letter/j/2acd7d/32.png) [@JTAMETHYST](https://community.cartalk.com/u/JTAMETHYST)\
**Post date:** [November 5, 2007, 6:14pm UTC](https://community.cartalk.com/t/1998-chevy-malibu/6808/18 "2007-11-05T18:14:03Z")

</div>

I learned this from my father when I was a kid in the '50s. To combat corrosion due to the battery solution (acid), smear grease on the battery posts as well as on the cable terminals. Using those green-colored & red-colored felt won’t do much good. They are just to remind you the red-colored felt is positive, & any other color is negative.
