# 1996 ford windstar stalls

**URL:** <https://community.cartalk.com/t/1996-ford-windstar-stalls/3427>\
**Category:** Maintenance/Repairs\
**Tags:** stalls, engines\
**Created:** [August 21, 2007, 4:46am UTC](https://community.cartalk.com/t/1996-ford-windstar-stalls/3427 "2007-08-21T04:46:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hollowpoint](https://avatars.discourse-cdn.com/v4/letter/h/4af34b/32.png) [@hollowpoint](https://community.cartalk.com/u/hollowpoint)\
**Post date:** [August 21, 2007, 4:46am UTC](https://community.cartalk.com/t/1996-ford-windstar-stalls/3427/1 "2007-08-21T04:46:23Z")

</div>

i went to aamco and had the throttle/pedal position sensor replaced on the van according to the CEL code. it ran ok for about two weeks, now the van just dies after driving it for two or three hours. afer it stalls it starts right up again. the CEL doesn’t go on and it doesn’t shudder or shake or sputter. the engine just shuts off. can someone out ther help?

---

<div class="post-metadata">

**Author:** ![kycamaroguy](https://avatars.discourse-cdn.com/v4/letter/k/aeb1de/32.png) [@kycamaroguy](https://community.cartalk.com/u/kycamaroguy)\
**Post date:** [May 18, 2008, 3:31pm UTC](https://community.cartalk.com/t/1996-ford-windstar-stalls/3427/2 "2008-05-18T15:31:54Z")

</div>

have the ignition control module checked