# 1994 Mustang Clutch noise

**URL:** <https://community.cartalk.com/t/1994-mustang-clutch-noise/46588>\
**Category:** Maintenance/Repairs\
**Tags:** mustang, ford\
**Created:** [March 24, 2010, 7:58pm UTC](https://community.cartalk.com/t/1994-mustang-clutch-noise/46588 "2010-03-24T19:58:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![csutton](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@csutton](https://community.cartalk.com/u/csutton)\
**Post date:** [March 24, 2010, 7:58pm UTC](https://community.cartalk.com/t/1994-mustang-clutch-noise/46588/1 "2010-03-24T19:58:41Z")

</div>

I have a 1994 v6 mustang. There is a chirping noise when the clutch pedal is out. If i press it in, even a tiny bit, the noise goes away. I was wondering what this was. I have a brand new clutch, quadrant, cable, resurfaced flywheel etc. Also it did this when the clutch was replaced last time as well.

---

<div class="post-metadata">

**Author:** ![missileman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/missileman/32/1366_2.png) [@missileman](https://community.cartalk.com/u/missileman)\
**Post date:** [March 24, 2010, 8:12pm UTC](https://community.cartalk.com/t/1994-mustang-clutch-noise/46588/2 "2010-03-24T20:12:05Z")

</div>

Do you have the engine running when this occurs? If so, you have a bad throwout bearing. This explains why you had the noise at the last clutch change as well.

---

<div class="post-metadata">

**Author:** ![csutton](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@csutton](https://community.cartalk.com/u/csutton)\
**Post date:** [March 24, 2010, 8:30pm UTC](https://community.cartalk.com/t/1994-mustang-clutch-noise/46588/3 "2010-03-24T20:30:43Z")

</div>

It has a brand new throw out bearing. Which is why its a little confusing. It seems like the clutch cable or pedal just needs adjusting.