# 1993 S10 turn signal **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** chevrolet, s-10, electrical-wiring\ **Created:** [July 7, 2010, 1:20am UTC](https://community.cartalk.com/t/1993-s10-turn-signal/51396 "2010-07-07T01:20:20Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![amanthey1979](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@amanthey1979](https://community.cartalk.com/u/amanthey1979)\ **Post date:** [July 7, 2010, 1:20am UTC](https://community.cartalk.com/t/1993-s10-turn-signal/51396/1 "2010-07-07T01:20:20Z")
My 93 s10 pickup’s turn signals blink really slow. Also, when I step on the brake pedal, the turn signal stops blinking. When I turn the headlights on, the tail lights and brake lights do not work. Finally, when I do step on the brake pedal when the truck is off, the dash lights turn on also. ---
**Author:** ![Triedaq](https://avatars.discourse-cdn.com/v4/letter/t/65b543/32.png) [@Triedaq](https://community.cartalk.com/u/Triedaq)\ **Post date:** [July 7, 2010, 1:29am UTC](https://community.cartalk.com/t/1993-s10-turn-signal/51396/2 "2010-07-07T01:29:00Z")
This sounds like a bad chassis ground connection. For some reason, the brake light circuit is seeking a path to ground through the dash lights. I would start by checking for a good ground at the rear of the truck for the tail lights and brake lights. ---
**Author:** ![Triedaq](https://avatars.discourse-cdn.com/v4/letter/t/65b543/32.png) [@Triedaq](https://community.cartalk.com/u/Triedaq)\ **Post date:** [July 7, 2010, 1:11pm UTC](https://community.cartalk.com/t/1993-s10-turn-signal/51396/3 "2010-07-07T13:11:50Z")
I had another thouht: if either one filament in a tail light is making contact with the brake light filament, or there is a cross connection between the tail light circuit and the brake light circuit, this would cause your problem. Also, if you have a trailer light harness, check that out as well.