# 1993 Jeep Wrangler - vibration when accelerating **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** wrangler, jeep\ **Created:** [September 10, 2010, 1:14pm UTC](https://community.cartalk.com/t/1993-jeep-wrangler-vibration-when-accelerating/54908 "2010-09-10T13:14:05Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![DesignLLC](https://avatars.discourse-cdn.com/v4/letter/d/59ef9b/32.png) [@DesignLLC](https://community.cartalk.com/u/DesignLLC)\ **Post date:** [September 10, 2010, 1:14pm UTC](https://community.cartalk.com/t/1993-jeep-wrangler-vibration-when-accelerating/54908/1 "2010-09-10T13:14:05Z")
1993 Wrangler with 80K - 4 cylinder manual transmission - There is vibration when accelerating - U joints were replaced and the vibration continued - the vibration stops when the clutch pedal is pushed to the floor. The vibration returns when the clutch is engaged. Any suggestions to locate problem and correct ? thanks ---
**Author:** ![kizwiki](https://avatars.discourse-cdn.com/v4/letter/k/7cd45c/32.png) [@kizwiki](https://community.cartalk.com/u/kizwiki)\ **Post date:** [September 13, 2010, 1:17am UTC](https://community.cartalk.com/t/1993-jeep-wrangler-vibration-when-accelerating/54908/2 "2010-09-13T01:17:53Z")
Check every other bolt and nut related to the transmission for broken or loose bolts. Check to make sure the transmission’s transmount (which is a corrugated steel support for the transmission, usually located about three-quarters of the way to the rear of the transmission, under the transmission) is tight and solid. Check the engine motor mounts.