# 1992 honda accord

**URL:** <https://community.cartalk.com/t/1992-honda-accord/25271>\
**Category:** Maintenance/Repairs\
**Created:** [January 21, 2009, 12:25am UTC](https://community.cartalk.com/t/1992-honda-accord/25271 "2009-01-21T00:25:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rich\_in\_Buffalo](https://avatars.discourse-cdn.com/v4/letter/r/91b2a8/32.png) [@Rich\_in\_Buffalo](https://community.cartalk.com/u/Rich_in_Buffalo)\
**Post date:** [January 21, 2009, 12:25am UTC](https://community.cartalk.com/t/1992-honda-accord/25271/1 "2009-01-21T00:25:06Z")

</div>

The bolt holding my harmonic balancer to the crank keeps coming loose.Any ideas why? I used an impact wrench during installation.Can any timing problems cause this? I’ve reinstalled it again using loctite,but am afraid to drive it. (4-cyl)

---

<div class="post-metadata">

**Author:** ![Xebadaih](https://avatars.discourse-cdn.com/v4/letter/x/d07c76/32.png) [@Xebadaih](https://community.cartalk.com/u/Xebadaih)\
**Post date:** [January 21, 2009, 12:40am UTC](https://community.cartalk.com/t/1992-honda-accord/25271/2 "2009-01-21T00:40:14Z")

</div>

Try using a torque wrench instead of an impact wrench and get the bolt to the proper torque spec.