# 1991 F150 Clutch Peddle

**URL:** <https://community.cartalk.com/t/1991-f150-clutch-peddle/40309>\
**Category:** Maintenance/Repairs\
**Tags:** clutches, ford, f150\
**Created:** [December 3, 2009, 5:48pm UTC](https://community.cartalk.com/t/1991-f150-clutch-peddle/40309 "2009-12-03T17:48:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rabemis](https://avatars.discourse-cdn.com/v4/letter/r/58f4c7/32.png) [@rabemis](https://community.cartalk.com/u/rabemis)\
**Post date:** [December 3, 2009, 5:48pm UTC](https://community.cartalk.com/t/1991-f150-clutch-peddle/40309/1 "2009-12-03T17:48:49Z")

</div>

Yesterday the clutch peddle on my 91 F150 stopped half way after I released it. This happedned a dozen time yesterday. Each time, I tapped the peddle underneath with my toe and it came up. Otherwise there did not seem to be any other issues. I checked for fluid leakage and found nothing obvious. The evening before I replaced the turn signal switch/wire harness that runs down the streering columm. Any suggestions on the cause of the problem??

---

<div class="post-metadata">

**Author:** ![ken\_green](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/ken_green/32/816_2.png) [@ken\_green](https://community.cartalk.com/u/ken_green)\
**Post date:** [December 3, 2009, 6:53pm UTC](https://community.cartalk.com/t/1991-f150-clutch-peddle/40309/2 "2009-12-03T18:53:26Z")

</div>

Check for pivot bushing wear.  
The pedal pivots on bushings and there’s a bushing in the master cylinder push rod.