# 05 wrangler w/ recurring ignition sw problem

**URL:** <https://community.cartalk.com/t/05-wrangler-w-recurring-ignition-sw-problem/39609>\
**Category:** Maintenance/Repairs\
**Tags:** wrangler, jeep\
**Created:** [November 17, 2009, 1:37am UTC](https://community.cartalk.com/t/05-wrangler-w-recurring-ignition-sw-problem/39609 "2009-11-17T01:37:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![03impreza](https://avatars.discourse-cdn.com/v4/letter/0/51bf81/32.png) [@03impreza](https://community.cartalk.com/u/03impreza)\
**Post date:** [November 17, 2009, 1:37am UTC](https://community.cartalk.com/t/05-wrangler-w-recurring-ignition-sw-problem/39609/1 "2009-11-17T01:37:48Z")

</div>

My 05 wrangler is now on its third go around to replace a faulty ignition switch - I believe the mechanical part. The first time, under warranty, the dealer replaced the steering column. About a year later, same symptoms, (insert and turn key normally - no starter crank), but this time no warranty. Local garage replaced steering col again ($600). Now, maybe 3 years later, same problem. Different mechanic has located part from a dismantler (rod actuator, now separated from steering col) which will fix problem, I’m sure, and at somewhat lower cost.  
  
  
  
 Question: has anyone seen this as a recurring or common problem with this vehicle? Is there an inexpensive DIY fix?  
  
  
  
 Thanks!