# 03 jeep liberty

**URL:** <https://community.cartalk.com/t/03-jeep-liberty/43960>\
**Category:** Maintenance/Repairs\
**Tags:** liberty, jeep\
**Created:** [February 6, 2010, 5:48pm UTC](https://community.cartalk.com/t/03-jeep-liberty/43960 "2010-02-06T17:48:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lovette](https://avatars.discourse-cdn.com/v4/letter/l/97f17d/32.png) [@lovette](https://community.cartalk.com/u/lovette)\
**Post date:** [February 6, 2010, 5:48pm UTC](https://community.cartalk.com/t/03-jeep-liberty/43960/1 "2010-02-06T17:48:56Z")

</div>

Engine light comes on when going down hill, at times will go into limp-in mode, until stop engine and restart. Codes are,Po 300 Random multiple cylinder misfire. 301-303-304-306. Engine is good otherwise. Thanks

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [February 6, 2010, 7:43pm UTC](https://community.cartalk.com/t/03-jeep-liberty/43960/2 "2010-02-06T19:43:34Z")

</div>

lovette, it would have been best if you went back to your original thread:  
[http://community.cartalk.com/posts/list/2136052.page](http://community.cartalk.com/posts/list/2136052.page)

Just go there and provide an update on any new info or attempted diagnostics/repairs.

Are you saying that the transmission goes into limp mode in addition to the misfire?

---

<div class="post-metadata">

**Author:** ![lovette](https://avatars.discourse-cdn.com/v4/letter/l/97f17d/32.png) [@lovette](https://community.cartalk.com/u/lovette)\
**Post date:** [February 6, 2010, 10:14pm UTC](https://community.cartalk.com/t/03-jeep-liberty/43960/3 "2010-02-06T22:14:50Z")

</div>

The light will flash, even when it is on, when going down hill. Often it goes into limp in mode when this happens. The jeep does fine until this happens.