# 02 Town and Country

**URL:** <https://community.cartalk.com/t/02-town-and-country/10650>\
**Category:** Maintenance/Repairs\
**Tags:** fans\
**Created:** [February 14, 2008, 3:34pm UTC](https://community.cartalk.com/t/02-town-and-country/10650 "2008-02-14T15:34:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![WilliamsBrigham](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/williamsbrigham/32/672_2.png) [@WilliamsBrigham](https://community.cartalk.com/u/WilliamsBrigham)\
**Post date:** [February 14, 2008, 3:34pm UTC](https://community.cartalk.com/t/02-town-and-country/10650/1 "2008-02-14T15:34:34Z")

</div>

My 85,000 mile van’s fan only works in high. So it is either no heat on or on high. Anybody had this problem?

---

<div class="post-metadata">

**Author:** ![NYBo](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nybo/32/17281_2.png) [@NYBo](https://community.cartalk.com/u/NYBo)\
**Post date:** [February 14, 2008, 3:37pm UTC](https://community.cartalk.com/t/02-town-and-country/10650/2 "2008-02-14T15:37:02Z")

</div>

The blower motor resistor pack needs to be replaced. Fairly common and and fairly simple.

---

<div class="post-metadata">

**Author:** ![WilliamsBrigham](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/williamsbrigham/32/672_2.png) [@WilliamsBrigham](https://community.cartalk.com/u/WilliamsBrigham)\
**Post date:** [February 14, 2008, 3:39pm UTC](https://community.cartalk.com/t/02-town-and-country/10650/3 "2008-02-14T15:39:12Z")

</div>

Thanks NYBo I will give this a try!

---

<div class="post-metadata">

**Author:** ![NYBo](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nybo/32/17281_2.png) [@NYBo](https://community.cartalk.com/u/NYBo)\
**Post date:** [February 14, 2008, 3:44pm UTC](https://community.cartalk.com/t/02-town-and-country/10650/4 "2008-02-14T15:44:04Z")

</div>

You’re welcome!

One more thing: If the new resistor pack meets an untimely end, the blower motor is failing and drawing too much current.