Got any U-Pull it junk yards? Id go there first and just grab one from there. When y ou look at it you will see 3 little wire coils (old style) and if they all look cosher with no breaks in the wires then it will most likely work just fine. Many times you can get to the little bugger by dropping out the glove box, it is often directly behind the glovey. It’s held in by one screw (maybe a couple screws and will have a plug going into it) If you see something like this behind the glove box you just found your resistor. It is a rather small yet delicate part so be carful handling it and try NOT to touch or handle the wires, they dont like being fondled. The part will fit inside your tool box very well…